Frequently Asked Detailing Questions

Road salt and winter grime build up on paintwork, wheels, wheel arches and underneath vehicles. Regular removal helps reduce corrosion risks.

1. Rinse loose salt and grit thoroughly.
2. Apply a suitable citrus pre-wash or traffic film remover.
3. Allow the recommended dwell time. Never let chemicals dry.
4. Rinse thoroughly, especially wheel arches and accessible lower areas.
5. Follow with a safe contact wash.

Recommended: Stjärnagloss Först X, Autobrite Citrus Pre Wash and suitable pre-wash cleaners.

During heavily salted conditions, aim for weekly cleaning where practical, particularly after driving on treated roads.

Even a careful rinse can help remove loose salt when a full wash is not possible.

Always avoid rubbing salt-covered paintwork before removing grit and dirt.

A ceramic coating can help protect paintwork and make winter dirt easier to remove.

However, ceramic coatings do not eliminate corrosion risks or protect every exposed metal component.

Regular washing remains essential, including wheels, arches and suitable underbody areas.

Small black spots on lower doors, sills and rear panels are often road tar or bitumen.

They can be particularly noticeable on white and light-coloured vehicles.

Use a dedicated automotive tar remover rather than scraping or aggressive rubbing.

1. Wash and rinse the affected area.
2. Check the product's surface compatibility.
3. Apply tar remover as directed.
4. Allow it to dissolve contamination without drying on the surface.
5. Gently remove loosened residue.
6. Rinse and wash again if instructed.

GYEON Q²M Tar REDEFINED is one option available from our range.

Tar removers target sticky road tar and bitumen deposits.

Iron removers target ferrous contamination such as embedded brake dust and industrial fallout.

They perform different jobs and should not be treated as interchangeable products.

Don't panic! Your ceramic coating may not have failed.

Road salt, traffic film, tar, iron fallout and mineral deposits can mask the coating's water-repellent properties.

Try these steps:

1. Thoroughly pre-wash the vehicle.
2. Carry out a safe contact wash.
3. Use a suitable ceramic maintenance shampoo such as GYEON RestartWash.
4. Remove tar or iron contamination where necessary with compatible products.
5. Rinse thoroughly and reassess the water behaviour.

If water behaviour returns, contamination was likely masking the surface.

If it does not, the coating may require further inspection or maintenance.

Yes. Use a snow foam suitable for coated vehicles and follow its instructions.

Regular pre-washing helps reduce the amount of dirt remaining before contact washing.

Durability depends on the coating, surface preparation, application, mileage, storage and maintenance routine.

Always treat the manufacturer's quoted durability as conditional rather than a guarantee for every vehicle.

Regular safe washing and appropriate maintenance help preserve performance.

Snow foam can help soften and loosen dirt before contact washing, reducing the amount of contamination left on paintwork.

It is not a replacement for a proper contact wash, and foam thickness alone does not indicate cleaning strength.

1. Start with a thorough pre-wash.
2. Rinse away loosened contamination.
3. Use a clean, quality wash mitt.
4. Use plenty of shampoo lubrication.
5. Rinse the mitt regularly.
6. Dry using a clean, soft drying towel.

Never use a dropped or contaminated wash mitt on your paintwork.

Weekly or fortnightly cleaning is useful for many vehicles, depending on mileage, brake dust and winter road conditions.

Use a wheel cleaner suitable for the wheel finish and avoid applying products to hot wheels.

Some strong cleaners can damage sensitive finishes when used incorrectly.

Always check compatibility, dilution, dwell time and manufacturer instructions, particularly for bare, polished, anodised or damaged wheel finishes.

A dedicated glass repellent helps water form droplets and run off treated glass.

Performance depends on speed, weather, application and windscreen condition.

Always prepare glass thoroughly and maintain functioning wipers.

Visit our independent car detailing store in Portlethen, near Aberdeen.

We stock a wide range of professional car cleaning, detailing and paint protection products.

Our advertised standard UK delivery is £3.99, with free delivery on qualifying orders over £60.

Please check the checkout and shipping policy for current rates and exclusions.