GYEON Q²M Bathe+ – 500ml, 1 Litre & 4 Litre | SiO₂ Ceramic Car Shampoo – Wash, Protect & Shine

GYEON Q²M Bathe+ – 500ml, 1 Litre & 4 Litre | SiO₂ Ceramic Car Shampoo – Wash, Protect & Shine

Wash and protect your vehicle in one easy step with GYEON Q²M Bathe+, available in 500ml, 1 Litre and 4 Litre.

GYEON Q²M Bathe+ is an innovative SiO₂-infused car shampoo designed to clean your vehicle while simultaneously leaving behind hydrophobic protection. It is the perfect choice for maintaining ceramic-coated vehicles or adding an easy layer of water-repellent protection to suitable uncoated paintwork.

Instead of simply washing away dirt, Bathe+ helps leave the surface glossier, slicker and noticeably more hydrophobic after washing.

🧼 WASH + PROTECT IN ONE STEP

The beauty of GYEON Bathe+ is its simplicity.

You’re already washing the car – so why not add protection at the same time?

The SiO₂-based formula provides an easy way to maintain existing ceramic protection and boost water behaviour without needing to apply a separate wax or sealant after every wash.

Wash ➜ Rinse ➜ Hydrophobic Protection ➜ Done!

Why Choose GYEON Q²M Bathe+?

💧 SiO₂ CERAMIC PROTECTION
Contains SiO₂ technology to leave behind a protective, water-repellent layer during the washing process.

🌧️ EXCELLENT HYDROPHOBIC EFFECT
Creates impressive water beading and sheeting, helping water move quickly from the surface.

✨ ENHANCED GLOSS
Leaves paintwork looking cleaner, richer and glossier after washing.

🛡️ PERFECT FOR COATED VEHICLES
An excellent maintenance shampoo for vehicles already protected with a ceramic coating.

🧽 GOOD LUBRICATION
Provides the lubrication required for a safe contact wash when used correctly with quality wash media.

⚡ FAST & CONVENIENT
Cleaning and protection are combined into one process, making Bathe+ ideal when you want excellent results without adding multiple additional detailing stages.

Perfect for Ceramic-Coated Cars

Ceramic coatings still require regular maintenance to perform at their best.

Over time, everyday washing and environmental exposure can reduce the noticeable hydrophobic behaviour of the surface.

GYEON Q²M Bathe+ makes maintaining that protection incredibly easy.

Regular use can help boost water behaviour and maintain the slick, glossy characteristics associated with a well-maintained protected vehicle.

How To Use GYEON Q²M Bathe+

Bathe+ is a concentrated product, so a little goes a long way.

Always use on a cool vehicle and avoid working in direct sunlight.

Step 1 – Pre-Wash

Before touching the paintwork, remove as much loose contamination as possible using a suitable pre-wash or snow foam.

Allow it to work before thoroughly pressure rinsing the vehicle.

This reduces the amount of dirt remaining on the surface before your contact wash.

Step 2 – Prepare Your Wash Bucket

Add the recommended amount of GYEON Q²M Bathe+ to a bucket of clean water according to the current manufacturer’s instructions.

Do not assume that using extra shampoo will produce better results – Bathe+ is highly concentrated.

Step 3 – Wash the Vehicle

Using a clean, quality wash mitt or wash pad, wash the vehicle from the top down.

Work systematically, starting with the cleanest areas and leaving heavily contaminated lower sections until last.

Use plenty of wash solution and avoid applying unnecessary pressure.

Step 4 – Don’t Let It Dry

Because Bathe+ deposits protection as you wash, it’s particularly important that the shampoo solution is not allowed to dry on the surface.

Work in manageable sections if necessary, especially in warmer weather.

Step 5 – Rinse Thoroughly

Pressure rinse the vehicle thoroughly with clean water.

This is where you’ll begin to see one of Bathe+’s main benefits – enhanced hydrophobic water behaviour.

Watch the water bead and sheet from the freshly treated surfaces.

Step 6 – Dry the Vehicle

Dry the vehicle using a clean, soft microfibre drying towel or suitable vehicle dryer.

Avoid allowing hard water to naturally dry on the paintwork.

Great for Previously Protected Cars

Bathe+ isn’t designed to replace a full ceramic coating.

Instead, it works brilliantly as a maintenance and protection-boosting shampoo.

It’s particularly useful on vehicles protected with:

• Ceramic coatings
• SiO₂-based protection
• Spray ceramic products
• Suitable waxes and sealants

It can help maintain the freshly protected appearance between more comprehensive detailing sessions.

Ideal Winter Maintenance Shampoo

Winter can be particularly demanding on vehicle protection.

Rain, road grime and regular washing all take their toll.

Using Bathe+ during maintenance washes provides an easy way to clean and replenish hydrophobic behaviour simultaneously, making it an excellent addition to a winter car-care routine.

Bathe+ vs GYEON Bathe

Wondering which one to choose?

GYEON Q²M Bathe is primarily a pure maintenance shampoo designed to clean without intentionally adding protection.

GYEON Q²M Bathe+ combines the wash stage with SiO₂-based hydrophobic protection.

Choose Bathe when you simply want an excellent maintenance wash.

Choose Bathe+ when you want to wash AND boost protection at the same time.

Available in Three Sizes

500ml – Perfect for enthusiasts and regular home detailing.

1 Litre – Excellent value for frequent users and professional detailers.

4 Litre – Ideal for detailing studios, valeters and high-volume professional use.

Product Information

Brand: GYEON
Product: Q²M Bathe+
Available Sizes: 500ml / 1 Litre / 4 Litre
Product Type: SiO₂ Wash & Protect Shampoo
Purpose: Cleaning & Hydrophobic Protection
Ideal For: Ceramic-coated and protected vehicles
Finish: Glossy, slick & water repellent
Use: Professional & enthusiast detailing

GYEON Q²M BATHE+

CLEAN. PROTECT. SHINE.

If you want more from your regular car shampoo, GYEON Q²M Bathe+ combines effective cleaning with easy-to-achieve SiO₂ protection in one straightforward wash.

Wash the car. Boost the gloss. Enhance the protection. Enjoy the beading.