Autobrite Direct Magifoam Ultimate Snow Foam – 2026 Formula | 500ml & 5 Litre

Autobrite Direct Magifoam Ultimate Snow Foam – 2026 Formula

Thick Foaming Pre-Wash | Deep Cleaning Snow Foam | Professional Car Detailing

Take your vehicle’s pre-wash routine to the next level with Autobrite Direct Magifoam Ultimate Snow Foam, a specialist automotive pre-wash designed to produce a thick, rich blanket of foam that clings to vehicle surfaces and helps loosen dirt, traffic film and road grime before contact washing.

Whether you’re maintaining a daily driver, preparing a vehicle for a full detail or removing accumulated road grime, Magifoam provides an effective first stage in a safer vehicle washing routine.

Designed for use with a snow foam lance and pressure washer, its dense foam helps soften and lift surface contamination, allowing much of the loose dirt to be rinsed away before your wash mitt touches the paintwork.

Available in 500ml and 5 Litre, making it ideal for both car enthusiasts and professional detailers.

Key Features & Benefits

• Thick, Rich Snow Foam – Creates a dense blanket of foam for excellent surface coverage.
• Effective Pre-Wash Cleaning – Helps loosen road dirt, traffic film and everyday grime.
• Excellent Clinging Action – Foam remains on vehicle surfaces while the cleaning agents work.
• Helps Reduce Wash-Induced Swirls – Removes loose contamination before contact washing, reducing the amount of dirt dragged across paintwork.
• Ideal for Winter Maintenance – Useful for softening accumulated road grime and salt-contaminated dirt during colder months.
• Perfect for Regular Car Washing – An effective first stage before shampooing.
• Professional Detailing Performance – Suitable for car enthusiasts, valeters and detailing businesses.
• Two Convenient Sizes – 500ml for occasional use and 5 Litre for frequent washing and trade use.

Why Use Snow Foam Before Washing?

Every time your vehicle is driven, its exterior collects dirt, dust, traffic film and road contamination.

Washing a dirty vehicle immediately with a mitt can drag grit and abrasive particles across the paintwork, increasing the risk of fine scratches and swirl marks.

Using Magifoam as a pre-wash helps soften and loosen this contamination before physical contact.

After rinsing away the foam and loosened dirt, the vehicle is better prepared for a safer two-bucket contact wash.

How to Use Autobrite Magifoam

Step 1 – Prepare the Vehicle

Park in a shaded area and ensure the vehicle’s bodywork is cool.

For heavily contaminated vehicles, remove thick mud and grit with a preliminary rinse where appropriate.

Step 2 – Prepare Your Snow Foam Lance

Add the appropriate quantity of Magifoam to your snow foam lance bottle and dilute with water according to the manufacturer’s instructions.

Adjust the dilution and lance settings to suit your equipment and the level of contamination.

Step 3 – Apply the Snow Foam

Using a pressure washer and snow foam lance, cover the vehicle evenly from the lower panels upwards, ensuring good coverage across the bodywork, bumpers and other suitable exterior surfaces.

Step 4 – Allow the Foam to Dwell

Allow the foam to cling to the vehicle and loosen accumulated road grime.

Do not allow the product to dry on the surface.

Step 5 – Thoroughly Pressure Rinse

Rinse the vehicle thoroughly, paying particular attention to lower panels, wheel arches and areas where road grime accumulates.

Step 6 – Complete Your Contact Wash

Follow with a quality car shampoo and clean wash mitt to remove remaining contamination.

Step 7 – Dry and Protect

Dry using a soft microfibre drying towel and finish with your preferred quick detailer, wax or sealant if required.

Ideal for UK Winter Car Care

During autumn and winter, vehicles throughout Aberdeen and Aberdeenshire are regularly exposed to wet roads, grit, traffic film and road salt.

These contaminants can accumulate around wheel arches, sills, lower doors and bumpers.

Magifoam helps loosen this build-up during the pre-wash stage, making it easier to rinse away before contact washing.

For winter maintenance, always thoroughly rinse the vehicle, including accessible lower areas and wheel arches, to help remove salt deposits.

Perfect for

• Weekly and fortnightly maintenance washes
• Winter pre-washing
• Removing road grime and traffic film
• Preparing vehicles for contact washing
• Professional car valeting
• Detailing studios
• Washing cars, vans and suitable commercial vehicles

500ml or 5 Litre – Which Size Is Best?

500ml – Ideal for individual vehicle owners, home detailing and occasional use.

5 Litre – A practical trade size for professional detailers, valeters and customers washing multiple vehicles regularly.

Product Information

Brand: Autobrite Direct
Product: Magifoam Ultimate Snow Foam
Range: 2026
Product Type: Snow Foam / Exterior Pre-Wash
Sizes: 500ml & 5 Litre
Application: Snow Foam Lance & Pressure Washer
Primary Purpose: Pre-Wash Cleaning
Application Difficulty: Easy
Dilution: Follow Manufacturer’s Instructions

Important Usage Advice

Always follow the manufacturer’s label instructions and recommended dilution ratios.

Avoid applying to hot surfaces or in direct sunlight. Never allow the product to dry on the vehicle.

Foam thickness and cleaning performance will vary depending on your snow foam lance, pressure washer, water hardness and dilution.

Available at Protect & Shine Car Care

Purchase Autobrite Direct Magifoam Ultimate Snow Foam from Protect & Shine Car Care.

Available in our dedicated car detailing store in Portlethen, near Aberdeen, or order online for UK delivery.