VS-Pro Ceramic Detailer 500ml – High Speed Ceramic Spray | High Gloss & Hydrophobic Protection
THE NEW AND THE BEST… PUT IT TO THE TEST!
Introducing VS-Pro Ceramic Detailer 500ml – a fast and easy spray-on, wipe-off ceramic detailer designed to deliver incredible gloss, strong hydrophobic performance and durable protection without a complicated application process.
Perfect for professional detailers and car-care enthusiasts, VS-Pro Ceramic Detailer gives you the benefits of modern ceramic technology in a product that can be applied in just minutes.
Spray it. Wipe it. Buff it. Enjoy the gloss!
Why Choose VS-Pro Ceramic Detailer?
✨ HIGH SPEED CERAMIC
Designed for rapid application when you want ceramic protection without the lengthy process of applying a traditional ceramic coating.
💎 HIGH GLOSS
Immediately enhances the appearance of your paintwork, creating a deeper, richer and more reflective finish.
💧 HYDROPHOBIC
Creates excellent water-repellent properties, encouraging rain and wash water to bead and run from the surface.
🛡️ SUPER DURABLE
Leaves behind a durable protective layer to help maintain your vehicle’s freshly detailed appearance.
⚡ SPRAY ON & WIPE OFF
No complicated coating procedure. Simply spray, spread and buff.
🚗 LONG-LASTING RESULTS
Ideal for adding protection to uncoated vehicles or refreshing and maintaining existing paint protection.
How To Use VS-Pro Ceramic Detailer
For the best possible finish, always apply to clean, cool paintwork out of direct sunlight.
Step 1 – Thoroughly Wash the Vehicle
Start by washing the vehicle to remove road grime, dust and loose contamination.
For best results, use a proper pre-wash or snow foam followed by a safe contact wash. Rinse thoroughly afterwards.
Step 2 – Decontaminate If Necessary
If the paint feels rough after washing, bonded contamination may be present.
For maximum gloss and durability, consider removing:
- Iron and fallout contamination
- Tar deposits
- Tree sap and other bonded contamination
A clean and properly prepared surface will allow the ceramic detailer to perform at its best.
Step 3 – Dry the Vehicle
Dry the paintwork thoroughly using a clean, soft microfibre drying towel.
VS-Pro Ceramic Detailer should be applied to a clean surface for the best results.
Step 4 – Shake Before Use
Give the bottle a good shake before application to ensure the product is thoroughly mixed.
Step 5 – Work One Panel at a Time
For easier application, divide the vehicle into manageable sections.
For example, complete one door, wing or half of the bonnet before moving onto the next section.
Step 6 – Spray the Product
Lightly mist VS-Pro Ceramic Detailer onto the panel.
You don’t need to saturate the surface – a small amount of product should be sufficient.
Alternatively, spray the product directly onto a clean microfibre towel for greater control, particularly around glass, trim and smaller areas.
Step 7 – Spread Evenly
Using a clean microfibre towel, spread the product evenly across the surface.
Use light pressure and ensure the entire section has been covered.
Step 8 – Buff to a High Gloss
Using a second clean, dry microfibre towel, gently buff the surface until you’re left with a clear, streak-free and incredibly glossy finish.
That’s it!
Spray ➜ Wipe ➜ Buff ➜ Protected
For Even Better Results
For maximum performance, avoid applying too much product. More isn’t necessarily better.
A light and even application makes the product easier to buff and helps produce a clean, streak-free finish.
For your first application, carrying out a thorough wash and decontamination beforehand will help VS-Pro Ceramic Detailer bond to a cleaner surface.
Perfect as a Maintenance Product
VS-Pro Ceramic Detailer isn’t just for initial protection.
It’s also an excellent addition to your regular maintenance routine, helping to restore:
Gloss • Slickness • Water Beading • Hydrophobic Performance
Use it after your maintenance wash whenever your existing protection needs a boost.
Ideal for Professional Detailers
The quick spray-on/wipe-off application makes VS-Pro Ceramic Detailer particularly useful when time matters.
It’s ideal for:
- Professional detailing
- Maintenance details
- Valeting
- Show-car preparation
- Weekend detailing
- Adding a final gloss boost
- Maintaining existing protection
- Quickly protecting freshly cleaned paintwork
Product Information
Brand: VS-Pro
Product: Ceramic Detailer
Size: 500ml
Type: High Speed Ceramic Detailer
Application: Spray On & Wipe Off
Finish: High Gloss
Properties: Hydrophobic & Durable
Suitable For: Exterior automotive surfaces
VS-PRO CERAMIC DETAILER
HIGH SPEED CERAMIC. HIGH GLOSS. HYDROPHOBIC. SUPER DURABLE.
If you’re looking for an easy way to add serious gloss and ceramic-style protection to your vehicle without spending hours applying a traditional coating, VS-Pro Ceramic Detailer 500ml is ready to put to the test.
THE NEW AND THE BEST… PUT IT TO THE TEST!
